=====BIOS频率/电压控制基础项中英文对照表===== |
Advanced Frequency Settings | 高级频率设置 |
CPU Clock Ratio | CPU倍频 |
CPU Frequency | CPU内频率 |
Advanced CPU Core Features | CPU核心参数高级设置 |
Intel(R) Turbo Boost Tech | 是否启动INTEL CPU加速模式 |
CPU Cores Enabled | 启动CPU多核心技术 |
CPU Multi-Threading | 启动CPU超线程技术 |
CPU Enhanced Halt (C1E) | Intel C1E功能 |
C3/C6/C7 State Support | 是否允许CPU进入C3/C6/C7模式 |
CPU Thermal Monitor | Intel TM功能 |
CPU EIST Function | Intel EIST功能 |
Bi-Directional PROCHOT | 是否启动PROCHOT功能 |
Virtualization Technology | 是否启动INTEL虚拟化技术 |
QPI Clock Ratio | 设置QPI倍频 |
QPI Link Speed | 设置QPI速度 |
Uncore Clock Ratio | 设置UNCORE倍频 |
Uncore Frequency | 显示BCLK Frequency(MHz)*Uncore Clock Ratio结果 |
Base Clock(BCLK) Control | CPU基频控制 |
BCLK Frequency(Mhz) | CPU基频调整 |
Extreme Memory Profile (X.M.P.) | 开启BIOS读取XMP规格内存模块的SPD资料,可增强内存效能 |
System Memory Multiplier (SPD) | 内存倍频调整 |
Memory Frequency(Mhz) | 内存频率调整 |
PCI Express Frequency(Mhz) | PCI Express插口时钟调整 |
C.I.A.2 | 第二代智能CPU效能加速器设置 |
CPU Clock Drive | CPU时钟振幅调整 |
PCI Express Clock Drive | PCI Express时钟振幅调整 |
CPU Clock Skew | CPU时钟超前芯片组偏移量 |
Extreme Memory Profile (X.M.P.) | 开启BIOS读取XMP规格内存模块的SPD资料,可增强内存效能 |
System Memory Multiplier (SPD) | 内存倍频调整 |
Memory Frequency(Mhz) | 内存频率调整 |
Performance Enhance | 增强系统性能 |
DRAM Timing Selectable (SPD) | 动态记忆体时序选择 |
Profile DDR Voltage | DDR电压概要 |
Profile QPI Voltage | QPI电压概要 |
Channel Interleaving | 通道交织 |
Rank Interleaving | 排列交织,不知道如此翻译是否准确,大家可以看英文释义 |
CAS Latency Time | |
tRCD | |
tRP | |
tRAS | |
tRC | |
tRRD | |
tWTR | |
tWR | |
tWTP | |
tWL | |
tRFC | |
tRTP | |
tFAW | |
Command Rate(CMD) | 控制速度 |
B2B CAS Delay | B2B CAS延迟 |
Round Trip Latency | 往返延迟 |
Different DIMMs | |
Different Ranks | |
On The Same Rank | |
Load-Line Calibration | 是否启动Load-Line校准功能 |
CPU Vcore | CPU 核心电压设置 |
QPI/Vtt Voltage | QPI/Vtt电压设置 |
PCH Core | PCH核心设置 |
CPU PLL | CPU锁相环设置 |
DRAM Voltage | DRAM电压 |
DRAM Termination | DRAM结点 |
Ch-A Data VRef. | |
Ch-B Data VRef. | |
Ch-A Address VRef. | |
Ch-B Address VRef. | |
Miscellaneous Settings | 其它设置 |
Isochronous Support | 同步支持 |